- DESIGN: The LED illuminant (5 watts, 500 lumens) in the base of the lamp is switched on and off using a push button switch on the upper part of the lamp and can be dimmed by pressing and holding the switch.
- MATERIAL: This modern table lamp consists of a wooden base, which has a permanently installed LED bulb in the middle and is completed by a white textile lampshade.
- FUNCTION: The main lighting is switched separately via a toggle switch on the socket, so you can decide whether you want to use one or both light sources.
- LIGHT SOURCE INCLUDED: A high-quality, energy-saving LED light source is included. Compared to normal lights, LED spotlights consume a minimal amount of electricity and are even lower in consumption than energy-saving lights. This protects the environment and your wallet.
- DIMENSIONS: length x width x height lampshade in cm: 32 x 20 x 20
• Material. Wood, light oak color
• Lampshade: textile, white
• 5 watt LED stripe, dimmable
• Pushbutton switch, toggle switch
• Protection class: IP20
• illuminant included: Yes
• Socket: E27
• Energy consumption: 10 watts
• Light colour: warm white to cool white + RGB color mode
• Material : metal silver, plastic
• protection class: IP20
• luminous flux: 806 lm (lumen)
• energy consumption: 10 kWh/1000h
• color temperature: 2700-6400 K (Kelvin)
• Light color: warm white to cool white + RGB color mode
• Ra > 80
• Energy saving: 80%
• Rated power consumption: 10 W (Watt)
• Rated lifetime: 30,000 h (hours)
• Switching cycles: 15,000x
• Operating voltage: 220-240 V (volts)
• Mains frequency: 50 Hz (hertz)
• Mercury content: 0 mg (milligrams)
• Comparison to normal light bulb: 10W - 60W
• Ambient temperature: -20°C to +40°C
• Dimmable: Yes
• Can be used with sensor/timer: yes
• Nominal half-power angle: 200° (degrees)
• diameter x height in: 6 x 12
• ramp-up time to 100%: <1 sec (seconds)
• Compatible app: Smart Life
• Suitable operating systems: IOS, Android
• Voice control via Amazon Alexa
• RGB color mode: choice of 16 million colors
• Memory function (last setting is adopted)
• timer (different days and times can be programmed)
• different scene modes can be set